GIGLIOTTI Marco

Professor

CNRS-Université de Poitiers-ISAE ENSMA

Téléport 2 – 1 avenue Clément Ader

BP 40109 – 86961 Futuroscope Chasseneuil Cedex

Biographie


  • 1999, Laurea, Univ. Pisa, Italie
  • 2001, MSc, Univ. Bristol, UK
  • 2004, PhD, Ecole des Mines de Saint-Etienne, France
  • 2012, HDR, Univ. Poitiers, France

Recherche


Research: ageing and durability of organic composite materials: experimental and modelling, multi-physical and multi-scale approaches

 

  • 12 Post-Doc/PhD theses, 35 stages co-supervised
  • 3 books, 5 book chapters/invited volumes, around 50 journal papers
  • ISI/SCOPUS h-index : 14, 714 citations

 

 

Research collaborations:

  • Industrial partners: AIRBUS GROUP INNOVATION Suresnes, SAFRAN Group (Aircraft Engines, Nacelles, Composites), AIRBUS SAS Toulouse,
  • Academic partners:
  • Prof. Stepan LOMOV (KU Leuven, Belgium)
  • Prof. Valter CARVELLI (Polytechnic of Milan, Italy)
  • Prof. Erasmo CARRERA (Polytechnic of Turin, Italy)
  • Prof. Dinh Quy VU (HUST, Hanoi, Vietnam)
  • Proff. Xavier COLIN, Bruno FAYOLLE, Jacques        VERDU (PIMM, ENSAM, Paris, France)
  • Proff. Federica DAGHIA, Pierre LADEVEZE (LMT Cachan, France)
  • Prof. Frédéric JACQUEMIN (Univ. of Nantes & GeM, France)

 

Research programs:

 

  • 2018-: EU H2020 M-ERA.net ISIBHY, Increase of Strength of Interface Between liner and composite in HYdrogen tank, Partners of the Research: RESCOLL, France, PPRIME Institute, Poitiers, France, Università della Calabria, UNICAL, Italia. Accepted for funding
  • 2018-: EU H2020-MG-2016-2017 Mobility for Growth HOMER, Holistic Optical Metrology for Aero-Elastic Research, Partners of the Research: Deutsches Zentrum für Luft‐und Raumfahrt e.V., Göttingen, DLR, Institute of Aerodynamics and Flow Technology – Institute of Aeroelasticity, Germany, Technische Universiteit Delft, TUD, Faculty of Aerospace Engineering, Aerodynamics Group, Netherlands, Centre National de la Recherche Scientifique, CNRS, PPRIME Institute, Poitiers, France, Universität der Bundeswehr München, UNIBWM, Institut für Strömungsmechanik und Aerodynamik, Germany, Office national d’études et de recherches aérospatiales, ONERA, Department of Fundamental and Experimental Aerodynamics – Department of Aeroelasticity and Structural Dynamics, France, LaVision GmbH LAVIS, Germany, University of Southampton, SOTON, Faculty of Engineering and the Environment – Aerodynamics and Flight Mechanics Research Group, UK. Accepted for funding

  • ANR IMPEKKABLE, “Etude des Performances Mécaniques du PEKK et de ses Capacités à Résister aux Efforts et à l’Environnement – Investigating the Mechanical Behaviour of PEKK and its Ability to Withstand with Load and the Environment” (2015-2019, 48 months, Type of contract : ANR, Participants: AIRBUS Group Innovations, ARKEMA, DPMM ENSMA Poitiers, PIMM ENSAM Paris). Funding: around 200 k€ (including funding of a 3yrs PhD student). Scientific responsible for ISAE-ENSMA, PPRIME
  • Participation to the ANR LABEX “Interactifs”, Theme 2: Heat and Mass Transfer, (2013-2019, ANR-11-LABX-0017-01, responsible for ISAE-ENSMA Theme 2: Prof. D Halm, Prof. JF Thovert). Funding: around 100 k€ (including funding of a 2yrs Post-Doc and 3 Master students)
  • POITOU-CHARENTES Region/SFA, 2015, Funding for buying experimental devices: around 20 k€
  • CNRS PEPS MICMA program, Caractérisation et modélisation du comportement thermomécanique local de la matrice polymère d’un composite structural (2014, with Dr. O. Smerdova – principal investigator, partnership with ONERA, Dr. Bruno Passilly, Dr. Gaëlle Roger). Funding: around 10 k€
  • SNECMA, SAFRAN Group contract n. YQ/2013/01255, 2014, “Vieillissement par thermo-oxydation de la PR520 : étude par µ-indentation de la couche oxydée” (with Dr. O. Smerdova, principal investigator). Funding: around 10 k€. Scientific responsible for ISAE-ENSMA, PPRIME

  • PRC, “Vieillissement Humide de Matériaux Composites Architecturés – Study of the hygrothermal ageing and degradation of comples structured (textile, 2D-3D woven) composites for aircraft (aeroengines) applications” (2011-2014, 36 months, Type of contract : PRC “Composites” Groupe SAFRAN, Participants: DPMM ENSMA Poitiers, SAFRAN (SNECMA/AIRCELLE), ONERA, LMT Cachan, MATEIS Lyon, UTC Compiègne, …). Funding: around 200 k€ (including funding of a 3yrs PhD student and 2 Master students). Scientific responsible for ISAE-ENSMA, PPRIME
  • POITOU-CHARENTES Region, 2011, Funding for buying experimental devices: around 7 k€   
  • FUI COMPTINN, “COMPosites TIèdes INNovants – Study of high temperature organic (polymer) based composite for aircraft (aeroengines) applications” (2010-2013, 36 months, Participants: DPMM ENSMA Poitiers; SAFRAN, EADS IW, LMT Cachan, INSA Lyon, LCTS Bordeaux, … Co-responsible for DPMM ENSMA: Prof. MC Lafarie-Frenot). Funding: around 250 k€ (including funding of a 3yrs PhD student)
  • FRAE VICOMTHE, “VIeillissement des COmposites aéronautiques structuraux – effets couplés de la fatigue Mécanique, Thermique, Hydrique et Electrique – Study of the mechanical, thermal, hygric and electrical ageing of composite materials for aircraft (fuselage) applications” (2008-2010, 24 months, Partners: DPMM ENSMA Poitiers, AIRBUS FRANCE, LIM ENSAM Paris, LGMT ICA Toulouse. Co-responsible for DPMM ENSMA: Prof. MC Lafarie-Frenot). Funding: around 100 k€
  • ANR RNMP CoMéDi, “Prévision du vieillissement thermo-oxydant de stratifiés composites à matrice organique dediés à l’aéronautique: prise en compte des couplages mécaniques-diffusifs – Study of the chemo-mechanical degradation and ageing of organic based composites for aeronautical applications by employing a multi-physics/multi-scale strategy” (2007-2008, 12 months, Participants: DPMM ENSMA Poitiers, EADS IW, LIM ENSAM Paris. Scientific direction for DPMM ENSMA: Prof. M.C. Lafarie-Frenot). Funding: around 250 k€ (including funding of a 3yrs PhD student)
  • EXPERT, “Winglet: Development of an Experimental TestBed Ceramics Based Material” (2006-2007, 12 months, Type of contract: ESA – European Space Agency, Participants: CIRA, ESA, ALCATEL Alenia Space, Centro Sviluppo Materiali, Università di Napoli, Seconda Università di Napoli SUN. Co-worker: Dr. Michele Ferraiuolo, CIRA)
  • ASA, “UHTC Wing Leading Edge: Development of a Ceramic Experimental Wing Leading Edge” (2006-2007, 12 months, Type of contrat: ALCATEL Alenia Space, Participants: CIRA, ALCATEL Alenia Space, Centro Sviluppo Materiali. Co-worker: Dr. Michele Ferraiuolo, CIRA)
  • USV TPS, “Development of an Experimental TPS (Thermal Protection Systems) for USV (Unmanned Space Vehicles)” (2006-2007, 12 months, Type of contract: PRORA – Progr. di Ricerca Aerospaziale (Italia), Participants: CIRA, ALCATEL Alenia Space, Centro Sviluppo Materiali, Università di Napoli. Co-worker: Dr. Michele Ferraiuolo, CIRA)
  • NOSE, “Development of an Experimental Nose-Cap made by Ceramics Based Materials for space Re-entry Vehicles” (2005-2007, 24 months, Type of contract: PRORA – Programma di Ricerca Aerospaziale (Italia), Participants: CIRA, ALCATEL Alenia Space, Centro Sviluppo Material, Università di Napoli. Co-worker: Dr. Michele Ferraiuolo, CIRA)
  • DAMOCLES, “Damage in Composite Structures” (2005, 2007, European Community – GARTEUR AG-31, AG-32, Partners: CIRA, ONERA, DLR, QinetiQ, SiComp, Imperial College London, University of Sheffield. Co-worker and principal investigator: Dr. Aniello Riccio, CIRA)
  • VITAS, “Linear and Nonlinear Buckling of Wing Structures” (2004-2005, 12 months, Type of contrat: PIAGGIO AeroIndustries, Participants: CIRA, PIAGGIO AeroIndustries, Università di Napoli. Co-worker: Dr. Aniello Riccio, CIRA)
  • RRIT MENRT SUPERSONIQUE, “Etude et prévision du vieillissement de structures composites à matrice organique soumises a des chargements thermomécaniques répétés – Study of the hygrothermal ageing of organic based composite structures subjected to complex (transient and cyclical) hygrothermal loads, for aircraft (supersonic) applications” (2001-2004, Partners: EMSE Saint-Etienne, AIRBUS FRANCE, EADS CCR, ONERA, EC Lyon. Scientific direction for EMSE: Prof. A. Vautrin)
  • COMPAVS, “Controlling Manufacturing Processes and Variability in Composite Structures” (2000-2001, 12 months, Partners: Univ. Bristol, AIRBUS UK, QinetiQ/DERA, Augusta Westland, Shorts Bombardier. Scientific direction for Univ. Bristol: Prof. M.R. Wisnom)

 

 

Enseignement


Thermal and Energy Engineering Department (GTE), IUT de Poitiers

  • General Mechanics
  • Strength and Properties of Materials
  • Responsability for teching duties GTE2 (DE GTE2, PE GTE)

GTE Department

IUT de Poitiers,

14, allée Jean Monnet, TSA 41114

86073 POITIERS CEDEX 9

FRANCE

 

Activités administratives


Other:

  • Habilitation à Diriger les Recherches (HDR), 09/2012
  • Qualification to become Full Professor in French Universities, CNU 60 (Mechanics, Mechanical Engineer, Civil Engineer), 02/2013
  • Qualification to become Full Professor in Italian Universities (ASN2012), 09-A1, Aeronautical, Aerospace and Naval Engineering, 02/2014
  • Prizes: PEDR (2017), PES (2013), CNFM (2012), AMAC ”Daniel Valentin” (2010), Pierre et Marie Curie YRA (2004)
  • Member of the Editorial Board of “Advances in Aircraft and Spacecraft Science” (Technopres), Editor-in-Chief: Prof. Erasmo Carrera, Politecnico di Torino, Italie, “Frontiers in Polymer Chemistry” (Frontiers), Editor-in-Chief: Dr. Pellegrino Musto, CNR, Italie

Séléction de publications


 

  • Composite Materials”, Lecture Notes, PoliTO Springer Series, Springer, In Preparation
  • Gigliotti, M. (2018) “Hygrothermoelastic Stress in Organic Matrix Composite Materials”, in Encyclopaedia of Continuum Mechanics, Editors: H. Altenbach, A. Ochsner, E. Carrera (Composites Section), Springer International Publishing
  • Gigliotti, M., Lafarie-Frenot, M.C., Grandidier, J.C., Minervino, M. (2017) “Mechanical Behaviour of Organic Matrix Composites – Effect of Thermo-oxidative Ageing”, in Ageing and Durability of Organic Composite Materials, Materials Science, ISTE-Wiley Editions, London
  • Gigliotti, M., Lafarie-Frenot, M.C., Grandidier, J.C., Minervino, M. (2017) “Comportement Mécanique des Composites à Matrice Organique – Vieillissement Thermo-oxydant”, in Durabilité et Vieillissement de Matériaux Composites à Matrice Organique, Collection Science des Matériaux, ISTE Editions, London
  • Gigliotti, M. (2017) Durabilité et Vieillissement de Matériaux Composites à Matrice Organique/Ageing and Durability of Organic Composite Materials, Series Editor, ISTE Editions & ISTE-Wiley, London, Série en préparation/Forthcoming set, Materials Science Collection
  • Gigliotti, M., Pannier, Y., Lafarie-Frenot, M.C., Grandidier, J.C. (2016) “Some Examples of “Multi-Physical” Fatigue of Organic Matrix Composites for Aircraft Applications”, in Composite Materials and Structures in Aerospace Engineering, Editor: E. Carrera, Special issue of Applied Mechanics and Materials, Trans Tech Publications, Pfaffikon, 18p, ISSN print: 1660-9336
  • Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2014) “Vieillissement des Composites à Matrice Organique. Cas d’études”, in Techniques de l’Ingénieur, AM 5 322, Editions T.I., Paris, 34p
  • Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2013) “Vieillissement des Composites à Matrice Organique. Outils de Modélisation”, in Techniques de l’Ingénieur, AM 5 322, Editions T.I., Paris, 17p
  • Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2011) “Effects of Thermo-Oxidation on Composite Materials and Structures at High Temperatures”, in Composite Materials in Engineering Structures, Editor: J.M. Davis, Materials Science and Technology Series, Nova Science Publisher, New York, ISBN: 978-1-61728-857-9. 52p
  • Gigliotti, M., Pannier, Y., Sinchuk, Y., Antoranz-Gonzalez, R., Lafarie-Frenot, M.C., Lomov, S.V. (2018) “X-Ray µCT based Assessment of Thermal Cycling Induced Cracks in Non-Crimp 3D Orthogonal Woven Composite Materials with Porosity”, In Preparation
  • Foti, F., Pannier, Y., Gigliotti, M., Mellier, D. (2018) “Damage Characterization During High Temperature Fatigue of Off-axis Woven OMC for Aircraft Applications”, In Preparation
  • Sinchuk, Y., Pannier, Y., Antoranz-Gonzalez, R. A., Lomov, S. V., Gigliotti, M. (2018) “Moisture Diffusion, Induced Swelling and Stress in Carbon/Epoxy 3D Textile Composite Materials with Porosity”, In Preparation
  • Beringhier, M., Djato, A., Maida, D., Gigliotti, M. (2018) “A Novel Protocol for Rapid Identification of Anisotropic Diffusion Properties of Polymer Matrix Composite Materials with Complex Texture”, Submitted
  • Gigliotti, M., Pannier, Y., Gonzalez, R.A., Lafarie-Frenot, M.C., Lomov, S.V. (2018) “X-Ray Micro-computed-tomography Characterization of Cracks Induced by Thermal Cycling in Non-crimp 3D Orthogonal Woven Composite Materials with Porosity”, Submitted
  • Foti, F., Gigliotti, M., Pannier, Y., Mellier, D., Lafarie-Frenot, M.C. (2018) “The Effect of the Environment on High Temperature Fatigue of Cross-Ply C/Epoxy Laminated Composites”, Composite Structures, Accepted, In Press
  • Lin, Y., Gigliotti, M., Lafarie-Frenot, M.C., Bai, J. (2018) “Numerical Simulation of the Thermoelectric Behavior of CNTs/CFRP Composite Laminates for Aircraft Applications”, Advances in Aircraft & Spacecraft Science, Accepted, In Press
  • Simar, A., Gigliotti, M., Grandidier, J.C., Ammar-Khodja, I. (2018) “Decoupling of Water and Oxygen Diffusion Phenomena in order to Prove the Occurrence of Thermo-oxidation during Hygrothermal Aging of Thermosetting Resins for RTM Composite Applications”, Journal of Materials Science, Accepted, In Press
  • Sinchuk, Y., Pannier, Y., Gueguen, M., Gigliotti, M. (2017) “Image-based Modeling of Moisture Swelling in 2D Textile Composites using a Global-Local Approach”, Proc IMechE Part C: Journal of Mechanical Engineering Science – Special Issue: “Lightweight Design in Transportation Engineering” Guest Editors: Serge Abrate, Southern Illinois University, USA, Vincenzo Crupi, University of Messina, Italy, Gabriella Epasto, University of Messina, Italy, Accepted, In Press
  • Sinchuk, Y., Pannier, Y., Gueguen, M., Tandiang, D., Gigliotti, M. (2017) “Computed-Tomography based Modelling and Simulation of the Moisture Diffusion and Swelling of Textile Composite Materials”, International Journal of Solids and Structures, Accepted, In Press
  • Simar, A., Gigliotti, M., Grandidier, J.C., Ammar-Khodja, I. (2017) “Water Diffusion in RTM Textile Composites for Aircraft Applications”, Advances in Aircraft & Spacecraft Science, 4 (5)
  • Gigliotti, M., Minervino, M., Lafarie-Frenot, M.C. (2016) “Assessment of Thermo-oxidative Induced Chemical Strain by Inverse Analysis of Shrinkage Profiles in Unidirectional Composites”, Composite Structures, 157, 320-336
  • Gigliotti, M., Minervino, M., Lafarie-Frenot, M.C., Grandidier, J.C. (2016) “Effect of Thermo-oxidation on the Local Mechanical Behaviour of Epoxy Polymer Materials for High Temperature Applications”, Mechanics of Materials, 101, 118-135
  • Pecora, M., Pannier, Y., Lafarie-Frenot, M.C., Gigliotti, M., Guigon, C. (2016) “Effect of Thermo-oxidation on the Failure Properties of an Epoxy Resin”, Polymer Testing, 52, 209-217
  • Gigliotti, M., Minervino, M., Lafarie-Frenot, M.C. (2016) “Thermo-oxidative induced Shrinkage in Organic Matrix Composites for High Temperature Applications: Effect of Fibre Arrangement and Oxygen Pressure”, Composite Structures, 146, 176-186
  • Gigliotti, M. (2016) “Residual Thermal Strains and Stresses in Organic Composite Materials”, Journal of Thermal Stresses, 39, 667-703
  • Cinquin, J., Colin, X., Fayolle, B., Mille, M., Terekhina, S., Chocinski, L., Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C., Minervino, M., Cluzel, C., Daghia, F., Ladeveze, P., Zhang, F. (2016) “Thermo-oxidation Behaviour of Organic Matrix Composite Materials at High Temperatures”, Advances in Aircraft & Spacecraft Science, 3, 171-195
  • Beringhier, M., Simar, A., Gigliotti, M., Grandidier, J.C., Ammar-Khodja, I. (2016) “Identification of the Orthotropic Diffusion Properties of RTM Textile Composites for Aircraft Applications”, Composite Structures, 137, 33-43
  • Lin, Y., Gigliotti, M., Lafarie-Frenot, M.C., Bai, J., Marchand, M., Mellier, D. (2015) “Experimental Study to Assess the Effect of Carbon Nanotube Addition on the Through-Thickness Electrical Conductivity of CFRP Laminates for Aircraft Applications”, Composites Part B: Engineering, 76, 31-37
  • Lin, Y., Gigliotti, M., Lafarie-Frenot, M.C., Bai, J. (2015) “Effect of Carbon Nanotubes on the Thermoelectric Properties of CFRP Laminate for Aircraft Applications”, Journal of Reinforced Plastics and Composites, 34, 173-184
  • Gigliotti, M., Lafarie-Frenot, M.C., Lin, Y., Pugliese, A. (2015) “Electro-Mechanical Fatigue of CFRP Laminates for Aircraft Applications”, Composite Structures, 34, 173-184
  • Grandidier, J.C., Olivier, L., Lafarie-Frenot, M.C., Gigliotti, M. (2015) “Modeling the Pressure Dependent Solubility in a Thermoset Resin for Simulating Pressure Accelerated Thermo-oxidation Tests”, Mechanics of Materials, 84, 44-54
  • Beringhier, M., Gigliotti, M. (2015) “A Novel Methodology for the Rapid Identification of the Water Diffusion Coefficients of Composite Materials”, Composites Part A: Applied Science and Manufacturing, 68, 212-218
  • Simar, A., Gigliotti, M., Grandidier, J.C., Ammar-Khodja, I. (2014) “Evidence of Thermooxidation Phenomena Occurring during Hygrothermal Aging of Thermosetting Resins for RTM Composite Applications”, Composites Part A: Applied Science and Manufacturing, 66, 175-182
  • Minervino, M., Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2014) “A Coupled Experimental/Numerical Approach for the Modelling of the Local Mechanical Behaviour of Epoxy Polymer Materials”, Journal of the Mechanics and Physics of Solids, 67: 129-151
  • Gigliotti, M., Minervino, M. (2014) “The Deformed Shape of Isotropic and Orthotropic Plates Subjected to Bending Moments Distributed along the Edges”, Meccanica, 49, p. 1367-1384
  • Gigliotti, M., Pannier, Y., Minervino, M., Lafarie-Frenot, M.C., Corigliano, P. (2013) “The Effect of a Thermo-oxidative Environment on the Behaviour of Multistable [0/90] Unsymmetric Composite Plates”, Composite Structures, 106: 863-872
  • Minervino, M., Gigliotti, M., Lafarie-Frenot, M.C., Grandidier, J.C. (2013), “The Effect of Thermo-oxidation on the Mechanical Behaviour of Polymer Epoxy Materials”, Polymer Testing, 32: 1020-1028
  • Gigliotti, M., Jacquemin, F. (2013) “On Cyclical Hygrothermal Fields in Laminated Plates”, Journal of Composite Materials, 47: 231-242
  • Vu, D.Q., Gigliotti, M., Lafaire-Frenot, M.C. (2013) “The Effect of Thermo-Oxidation on Matrix Cracking of Cross-Ply [0/90]s Composite Laminates”, Composites Part A: Applied Science and Manufacturing, 44: 114-121
  • Gigliotti, M., Minervino, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2012) “Predicting Loss of Bifurcation Behaviour of 0/90 Unsymmetric Composite Plates Subjected to Environmental Loads” Composite Structures, 94: 2793-2808
  • Vu, D. Q., Gigliotti, M., Lafarie-Frenot, M.C. (2012) “Experimental Characterization of Thermo-oxidation-induced Shrinkage and Damage in Polymer-Matrix Composites” Composites Part A: Applied Science and Manufacturing, 43: 577-586
  • Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2011) “Development of Experimental and Modelling Tools for the Characterisation of the Thermo-electro-mechanical Behaviour of Composite Materials for Aircraft Applications” Mécanique & Industries, 12: 87-101
  • Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2011) “Assessment of Chemo-Mechanical Couplings in Polymer Matrix Materials Exposed to Thermo-Oxidative Environments at High Temperatures and Under Tensile Loadings” Mechanics of Materials, 43: 431-443
  • Gigliotti, M., Grandidier, J.C., Lafarie-Frenot, M.C. (2011) “The Employment of 0/90 Unsymmetric Samples for the Characterisation of the Thermo-oxidation Behaviour of Composite Materials at High Temperatures” Composite Structures, 93: 2109-2119
  • Gigliotti, M., Olivier, L., Vu D.Q., Grandidier, J.C., Lafarie-Frenot, M.C. (2011) “Local Shrinkage and Stress Induced by Thermo-Oxidation in Composite Materials at High Temperatures” Journal of the Mechanics and Physics of Solids, 59: 696-712
  • Lafarie-Frenot, M.C., Grandidier, J.C., Gigliotti, M., Olivier, L., Colin, X., Verdu, J., Cinquin, J. (2010) “Thermo-oxidation Behaviour of Composite Materials at High Temperatures: Review of Research Activities Carried Out within the COMEDI Program” Polymer Degradation and Stability, 95: 965-974
  • Gigliotti, M., Grandidier, J.C. (2010) “Chemo-Mechanics Couplings in Polymer Matrix Materials Exposed to Thermo-Oxidative Environments” Comptes Rendus Mécanique, 338: 164-175
  • Ferraiuolo, M., Riccio, A., Gigliotti, M., Tescione, D., Gardi, R., Marino, G. (2009) “Thermostructural Design of a Flying Winglet Experimental Structure for the EXPERT Re-Entry Test” ASME – Journal of Heat Transfer, 131
  • Gigliotti, M., Riccio, A., Iuspa, L., Scaramuzzino, F., Mormile, L. (2009) “Weight Optimisation of Damage Resistance Composite Panels Including Cost Evaluation” Composite Structures, 88: 312-322
  • Gigliotti, M., Molimard, J., Jacquemin, F., Vautrin, A. (2009) “Maximum Curvatures of 0/90 Plates Under thermal Stress : Modelling and experimental Validation” Composite Science and Technology, 69: 93-96
  • Ferraiuolo, M., Riccio, A., Tescione, D., Gigliotti, M. (2008) “A Fast Procedure for Optimizing Thermal Protection Systems of Re-entry Vehicles” Journal of the British Interplanetary Society, 61: 478-486.
  • Gigliotti, M., Jacquemin, F., Molimard, J., Vautrin, A. (2007) “Modelling and Experimental Characterisation of Hygrothermoelastic Stress in Polymer Matrix Composites” Macromolecular Symposia, Special Issue: Times of Polymers and Composites, 247: 199-210
  • Gigliotti, M., Jacquemin, F., Molimard, J., Vautrin A. (2007) “Transient and Cyclical Hygrothermoelastic Stress in Laminated Composite Plates. Modelling and Experimental Assessment” Mechanics of Materials, 39: 729-745
  • Riccio, A., Gigliotti, M. (2007) “A Novel Numerical Delamination Growth Approach for The Preliminary Design of Damage Tolerant Composite Structures” Journal of Composite Materials, 41: 1939-1960
  • Gigliotti, M., Jacquemin, F., Vautrin, A. (2007) “Assessment of Approximate Models to Evaluate Transient and Cyclical Hygrothermoelastic Stress in Composite Plates” International Journal of Solids and Structures, 44: 733-759
  • Wisnom, M. R., Gigliotti, M., Ersoy, N., Campbell, M., Potter, K.D. (2006) “Mechanisms Generating Residual Stress and Distortion during Manufacture of Polymer-Matrix Composite Structures” Composites Part A: Applied Science and Manufacturing, 37: 522-529
  • Gigliotti, M., Molimard, J., Jacquemin, F., Vautrin, A. (2006) “On the Nonlinear Deformations of Thin Unsymmetric 0/90 Composite Plates Under Hygrothermal Loads” Composites Part A: Applied Science and Manufacturing, 37: 624-629.
  • Gigliotti, M., Jacquemin, F., Molimard, J., Vautrin, A. (2005) “Transition Saddle-Cylinder Shape of Thin Unsymmetric [0/90] Square Plates under Hygrothermal Loads: Fringe Projection Method and Variational Approach” Applied Mechanics and Materials, 3-4: 217- 222
  • Gigliotti, M., Jacquemin, F., Vautrin, A. (2005) “On the Maximum Curvatures of 0/90 Plates Under Thermal Stress” Composite Structures, 68: 177-184.
  • Gigliotti, M., Jacquemin, F., Vautrin, A. (2004) “Internal Stresses in Composite Laminates due to Cyclical Hygrothermal Loading. Application to Supersonic Flight” AIAA Journal, 42: 2600-2605
  • Gigliotti, M., Wisnom, M. R., Potter, K. D. (2004) “Loss of Bifurcation and Multiple Shapes of Thin [0/90] Unsymmetric Composite Plates Subject to Thermal Stress”, Composites Science and Technology, 64: 109-128
  • Gigliotti, M., Wisnom, M.R., Potter, K.D. (2003) “Development of Curvature during the Cure of AS4/8552 [0/90] Unsymmetric Composite Plates” Composites Science and Technology, 63: 187-197